A few weeks ago I was asked, by a very nice girl, if I would want to participate in a tiny house lecture/Q&A in Los Angeles. Being the publicity houndwhore that I am, I agreed.
With that in mind, if anyone in the Los Angeles area is not too drunk at 1pm this Sunday March 17th (St. Patrick’s Day for those of you in Rio Linda), come on down to Atwater Village, have a cup of coffee, and watch me make a fool out of myself for 45 mins! (you’ll have to buy your own coffee though). I’ll talk about my process, my cabin, and if I don’t get too nervous and wet my pants, I’ll answer questions about everything tiny house.
In case I suck and bore everyone to death, there’s a second lecture after mine about earth-building homes by a very cool and clever couple, it looks like they build fantastic hobbit houses from this picture on Facebook…
Robert and Mireille from Earth Works Building will be speaking about the history of natural building traditions. From cob, adobe, and clay ovens, to newer methods like sandbag structures, recycle friendly earthships. Learn how surprisingly inexpensive, fireproof, and energy efficient natural building can be and the vital connection it makes in building community. http://www.earthworksbuilding.com/
Clearly they will be more interesting than me so this event should be well worth the drive (and if it’s not, we can always start a food fight!)
For you Face-place fluent types, there’s a interweb page about it…
Lecture is free.
Lunch is pay-what-you-want.
Q&A to follow both presenters.
The event is being held at “Thank You For Coming” at 3416 Glendale Blvd, in Atwater Village, a short walk from either Silverlake or Glendale, I hear that the food is fantastic.
Like the cool kids always say, be there or be square!
It’s been gorgeous weather up on Mt. Elroy. Clear and crisp with some snow still on the distant peaks.
I was gone for a few weeks, went to Nashville and mid-Central Tennessee to check out the landscape (that’s a whole other post and a half). Upon my return I discovered that the evil “Woody the Woodpecker” had not only UNDONE the repairs I made to his recent damage, but he went back at my cabin with a vengeance.
Some of the holes actually go all the way through the OSB sheathing and into the insulation. Damage was done in all the same places, just more aggressively…
I nailed up some metal sheeting as a temporary fix. This week I will run down to LA and grab some metal mesh I have in the basement. Woodpeckers are Federally protected under the Migratory Bird Act (sounds like a lotta bulls**t if you ask me) so I can’t kill him. I can, however make life on the side of my cabin quite unpleasant for him. Metal mesh, sticky goop, and painted aluminum sheeting should do the trick (and maybe dull his pecker a bit). Since I am a law-obeying citizen and a friend to all living things great and small, I will bend my anger and let him live.
He may get a dinged pecker but such is life in the wild.
it’s a jungle out there.
I wish he wasn’t so damned cute
The first step in designing my new small house was laying it out in SketchUp.
SketchUp is Google’s very powerful and free 3D modeling software. I downloaded it from Google (it’s freeee!) then simply watched a few of Google’s “how to use SketchUp” videos. I’m pretty good with all kinds of software already so learning SketchUp was pretty simple for me. I suspect most folks could learn it with relative ease.
SketchUp also allows you to add furniture to your rooms from a free user-created online database (amazing!!) and then walk-through your model. This makes it possible to see exactly what your house will look and feel like before you spend dollar 1 on anything!
I’ve decided to do detailed layouts of each pod, then spend as much time tweaking and finalizing my design BEFORE I hire an architect to draw my blueprints. By making most aesthetic decisions in MY computer on FREE software, this will cut down on paid hours given to the architect.
The first pod to be designed is the main room, kitchen/dining/living. I need to fit a full kitchen, dining table (I want one, ok?!) and full sofa/tv watching area. Since the kitchen is integral and permanent, it comes first.
SketchUp will let me download a fully built kitchen from the online model warehouse. I found one that is small, tight and will fit in 1/4 of my 16′ wide x 22′ long room.
In order to be precise enough for the architect, I need to design the kitchen down to the 1/8 of an inch. With my rudimentary modeling skills, SketchUp is not the best tool for this. I’m gonna let you in on a BIG SECRET resource…
the IKEA online 3D kitchen planner…it is simply AMAZING!!!
You’ll need to download their 3D browser plug-in so it will run on your computer (their website will let you do it automatically). It is an app designed for you to lay out your dream kitchen (using their products) then go to Ikea and it will spit out an exact list of what to buy (and how much it’ll cost).
It has a very slight learning curve but if you can use SketchUp, you will breeze through the Ikea app with ease. You can build the entire room, complete with doors, windows and vaulted ceiling (all adjustable to your specs), appliances and all cabinetry, all placed down to 1/16 of an inch!
Here’s my new kitchen in the main room…
and the view from the kitchen into the living room!
The app will let you print an overhead layout plot…
elevations of all walls/views…
and a material list with prices…
so as you can see, we’re almost to the point where anybody with a computer and an Internet connection can design their own home (for free) and as I proved last year,
ANYONE with a pickup truck, a few bucks and a dream can build their own home.
btw, I started one of those face-page book things. It seems all the cool kids have them and I desperately want to fit in. Check it out and maybe be my friend? (that other tiny house place has like 8 million friends and I’m so totally jealous!)
I’ve been spending so much time up on my mountain that I think I’m out-growing the tiny cabin.
My goal of transitioning into full-time rural living is feeling quite attainable lately. I’m eager to put in some additional infrastructure (water tank, septic, garage), but I didn’t want to spend the money until I was ready to build the main house.
Knowing how long it takes to actually “build” a house, I thought I should get started sooner rather than later. I’ve been locked in my room playing around with SketchUp lately and I’ve finally settled on a design…
It’s a simple set of 3 small connected “pods”, built in the same style as my existing tiny cabin, bedroom pod, main room pod (living/dining/kitchen) and bathroom pod. Overall size so far is bedroom 12’x12′, main pod 16’x22′ and bathroom at 9’x12′ for a total of 604 sq ft.
By designing them as separate segments, I can use the lessons learned from building my small cabin and simply expand on them for the larger version…
-Single slope roof for ease of construction and lower material cost,
-Segmented design for building in stages,
-Built on piers for flood avoidance and easy utility access,
-Inter-connected rooms to make the interior seem more spacious (I love to roam from room to room in my LA condo),
-Use the same interior layouts from some of my favorite familiar spaces so I’ll know what each room will feel like before it’s built.
One of my favorite pre-fab homes is the FabCab, a timber-framed unit built using a pre-cut frame and SIPs. FabCab sells a gorgeous 550 sq ft model that is about what I need, the only problem for me is it costs $143,000 not including site work. Regrettably I do not have that kind of cash sitting around and I am not willing to borrow it.
FabCab’s lines are beautiful and very similar to what I’ve already built. By lowering the roof pitch, overall height and sidewalls a bit, I can get a more energy efficient interior by not having to heat and cool such a cavernous 14′ high space. By building in 3 segments, I can avoid a post and beam type timber frame and use less expensive stick-build methods (quality local labor is an issue in my remote area).
I can also have the exact floorplan I want to maximize my view and location, including an indoor/outdoor shower in my bathroom (a dream of mine, to be sure!) and a washer/dryer closet.
Since I will pay as I go and build it myself (with an experienced local carpenter or two), the interior and finish work can proceed at my own pace.
For the overall process I’ll go as far as I can in SketchUp then hire someone to do the blueprints, construction plans and engineering. Admittedly my grand scheme is only in the beginning stages but if I recall correctly, the last time I went down this road, within a year I had a cabin built (and got published in a magazine)!
Details are being considered, advice is being sought, money is being prayed for, the Gods of Art, Design, and Providence are being beseeched, and I’m feelin’ a fire down in me gut.
I hope to God it’s not the Lamb Vindaloo I had for dinner last night.
I was up at the cabin last weekend and noticed this…
I noticed the damage in the corner, up under the eaves
and what’s with the corners?…
when you look closely at the exposed tar paper, there’s acorns shoved all the way up and down the side…
I have been hacked.
a little online research found the culprit…
Bear in mind that it has been 4 days since I was up there last. This damage has occurred in the last 4 days. Pecky the Pecking Pest is a fast little bugger.
More online research tells me to repair the damage immediately. Apparently Pecky the Pecking Pest will start pecking then get bored and move a few inches and start pecking again. If he can’t break through to the insulation, he starts pecking again, a few inches away until he finds a nice hollow place to roost. I prefer to roast him but this must be fixed asap.
I run to the big box store and…
remove the old, warped siding, replace the tar paper, fill the pecked holes with Bondo…
since money is tight, my dream of Ipe wood siding will have to wait. I buy more 4’x8′ T-111 and slap it on, caulk the edges and paint…
Voila’… new back siding!
It’s not the siding of my dreams but not too shabby, plus it should keep the local vermin and riff-raff out.
I set up a spy camera to see if I catch the culprit…
WTF is that? alligators?!
A few weeks ago I drove up to Bodega Bay, CA to see an actual Tumbleweed Tiny House in person. Jay Shafer and his Tumbleweed Tiny House Company have had a lot of media coverage in the past year and I’ve been dying to actually see one of his homes in person. A charming and quite talented couple had built Jay’s “Lusby” model home to sell and they held an open house…see the Tumbleweed post here!
The house was adorable…
The 7500 lb. house is easily towed by a 3/4 ton pickup truck!
Check out the high level of fit and finish, it was stunningly well-built…
The kitchen was small but complete and the bathroom was surprisingly spacious…
The interior was beautifully done, hand-crafted cabinets & doors, solid construction, open airy feel with light woods, high quality fixtures and all-around terrific finish work. The shower was unexpectedly roomy and the upper loft area would be a magnificent place in which to wake up!
Great job Pepper, Jay and that shy guy who did the finish carpentry!
I’ve been doing a lot of soul-searching this past month, temps on my mountain have been very cold and nothing newsworthy has happened at the cabin lately. Though I’ve been offline a lot, I finally snapped outta my Xmas blues and snuck back online to wish y’all a fantastic 2012!
While it’s cozy here in the Christmas Corner, a big work push will be happening up at my compound right after I recover from my upcoming annual Jan 1 hangover.
Hopefully 2012 will see an addition to the cabin (oh yeah!), more decking, a sleeping loft (inspired by my friend Ranger X’s cabin!) and the successful online-ification of the recently completed “James P. Garzo Memorial Power Generating Facility”.
Gather ye young-‘uns a-boot, pull that holiday goose outta yer oven and throw a cold glass of cheap Champagne on the fire for me!
Merry Christmas and Happy New Year Everyone!
e. and 2011 are o-u-t!